Product Categories
Contact Us

Henan Tianchi Instrument & Equipment Co.,Ltd

Address:9 Floor 3 Unit 17 Building N0.39 Changxing Road, Huiji District, Zhengzhou City, Henan province, China

Mob:+86-15290868205

Tel:+86-371-56788280

Fax:+86-371-65715725

E-mail:
tianchi-demi@ln2container.com
tianchi-casie@ln2container.com

Website: www.ln2container.com

You are here:Home > News >

Snowflake ice machine cleaning steps

Edit: Henan Tianchi Instrument Equipment Co., Ltd    Date:2019-04-03
Ice cubes produced by snowflake ice machine are generally used in restaurants, hotels and other industries. Because they have to drink, we must ensure the quality of ice cubes. Therefore, we must clean the snowflake ice machines frequently. The cleaning steps are as follows:
1) Mix the approved disinfectant and dilute according to the manufacturer's instructions to produce a gallon of disinfectant solution and pour into the sink.
2) Push the ICE / OFF / WASH switch to WASH and start circulating the solution through the ice machine for about 10 minutes.
3) When disinfecting the machine, use a disinfectant solution and a clean cloth to clean all splash areas and internal surfaces of the refrigerator and door. If stubborn stains are caused by infrequent cleaning, use a soft brush.
4) Clean the condenser fins with compressed air or a soft brush while the disinfection cycle continues. The vacuum cleaner can easily collect dust. Be careful because the condenser fins may be sharp. Also be careful not to bend them. If they are bent, use a fin comb to straighten the fins.
5) Once 10 minutes have elapsed, press and hold the PURGE switch until all disinfectant solution is drained from the sink.
6) Re-open the water supply to the machine and fill the tank.
Snowflake ice machine cleaning steps
7) Turn the switch to WASH and let the fresh water cycle for two minutes, then press and hold the PURGE switch for two minutes until the disinfectant is rinsed.
8) Fill the tank with fresh water and repeat step 7.
9) The machine is now ready to run.
10) Replace the font panel and  reinstall the panel screws with a screwdriver.