Notes for Installation of Laboratory Ice Making Machine

The laboratory ice maker is mainly used to provide ice bath environment for the samples in the life science related experiments to prevent the degradation or deterioration of the samples (such as nucleic acids and proteins) due to the change of temperature, so as to ensure the accuracy and validity of the experimental results.

There are many and complicated circuits in the laboratory. In the place where the ice maker is installed, it should be far away from the heat source, without direct sunshine and good ventilation. In addition, the ambient temperature near the ice maker should not exceed 35 degrees Celsius, in order to prevent the excessive ambient temperature from causing bad heat dissipation of the condenser and affecting the ice making effect.

In addition, the ground installed with ice maker should be firm and flat, and the ice maker must maintain a level, otherwise it will lead to non-deicing and noise during operation.

Note: Two or more fewer people move and install the ice maker. Prevent back or other injuries.