Product Categories
Contact Us

Henan Tianchi Instrument & Equipment Co.,Ltd

Address:9 Floor 3 Unit 17 Building N0.39 Changxing Road, Huiji District, Zhengzhou City, Henan province, China






You are here:Home > News >

Ice Machine Installation Instructions

Edit: Henan Tianchi Instrument Equipment Co., Ltd    Date:2018-03-14
1, The placement of the refrigerator
(1) The ice machine should be placed in a place where the air circulation is safe and clean.
(2) Ice machines should not be placed in the open air, and should not be exposed to direct sunlight and rain. It must not be near heat sources.
(3) The use environment of the ice maker must not be lower than 5°C and not higher than 38°C.
(4) There should be enough space around the machine, especially the back can not be less than 250mm. So that the machine heat.
(5) Please adjust the anchor screws at the bottom of the machine to ensure that the machine is level and stable.
2, The installation of the water system
(1) Please connect with water source that meets local drinking water standards.
(2) If necessary, connect a filter to raise the water drinking standard.
(3) The water supply system must meet the following conditions:
a, The water temperature is the lowest 2 °C, the highest not more than 38 °C
b, Water pressure is minimum 0.02Mpa, maximum 0.8Mpa
 Ice Maker Design Of TIANCHI
3, The installation of power
(1) The power supply must be the same as that indicated on the machine nameplate.
(2) All lines must meet national standards.
(3) It must be grounded reliably, and the grounding wire must comply with electrical standards.
(4) The voltage fluctuation must not exceed ±10% of the rated voltage.