Product Categories
Contact Us

Henan Tianchi Instrument & Equipment Co.,Ltd

Address:9 Floor 3 Unit 17 Building N0.39 Changxing Road, Huiji District, Zhengzhou City, Henan province, China

Mob:+86-15290868205

Tel:+86-371-56788280

Fax:+86-371-65715725

E-mail:
tianchi-demi@ln2container.com
tianchi-casie@ln2container.com

Website: www.ln2container.com

You are here:Home > News >

Domestic Snow Ice Machine Disinfection Operation Steps

Edit: Henan Tianchi Instrument Equipment Co., Ltd    Date:2017-11-30
1, The disinfectant and warm water are mixed in a certain ratio. Solution Type Disinfectant, 6 gallons (23 liters) of water, mixed in 4Domestic Snow Ice Machine Disinfection Operation Steps ounces (120 ml).
2, With 1/2 disinfectant disinfect domestic snow ice maker removed parts. Use a cloth or sponge to remove any toxins from the surface of the parts, or soak the removed parts in a disinfectant solution. After disinfection, do not rinse parts.
3, With the remaining 1/2 disinfectant solution scrub ice machine and the surface of the refrigerator. Disinfectant with cloth or sponge to wipe the following areas.
(1) Evaporator plastic parts --- including the top, bottom and side.
(2) The bottom, top and side of the refrigerator. Do not rinse disinfectant area with water.
4, Fitted with domestic snow ice machine removed parts.
5, Made snowflake ice machine plug in the power and water, and the function switch to "clean" position.
6, In the sink by adding appropriate ice machine disinfectant.
7,Switch off the power switch to the "off" position to cut off the power and water supply after the domestic snow ice maker disinfection is completed (approximately 22 minutes) .
WARNING: The power must be turned off before proceeding to the next step .
8, Remove the parts for disinfection, remove the parts, please refer to the installation manual.
9, The disinfectant and warm water mixed in a certain ratio.
10, Disinfect the removed parts with a 1/2 disinfectant solution. Use a cloth or sponge to remove any toxins from the surface of the parts, or soak the removed parts in a disinfectant solution. After disinfection, do not rinse parts.
11, Install the removed parts, plug in the power, the function switch to the domestic snow ice maker "ice" position.