Pig Ultrasound Determination Of Pig Back Thickness And Eye Muscle Area

Pig Ultrasound Operation Procedure: The measurement part should be as clean as possible. → Apply the vegetable oil to the probe plane, the probe mold plane and the pig back measurement position. Place the probe and the probe mold on the measurement position to make the probe mold and the pig back close. Observe and adjust the screen influence. When the ideal image is appeared, the image is frozen immediately→ the back thickness and the eye muscle area are measured, and the information (such as measurement time, pig number, gender, etc.) is added.

Note: When measuring, the probe, probe mode and the tested posion should be tightly connected, but do not pressurize; the linear plane of the probe is perpendicular to the longitudinal axis of the midline of the pig back, and cannot chamfer; when identifying the ultrasound-image, first determine the skin interface, Three strong echogenic images produced by the interfacial connective tissue and the longissimus dorsi muscle membrane, and then the strong echo image of the sarcolemma around the eye muscle was determined to determine the perimeter of the eye muscle area.