Considerations of Veterinary B ultrasound

1.Pigs should be restraint when using pig ultrasound:The measured pig can be limited by the iron fence, so that it can stand naturally , and we can properly feed the fodder to keep the pig quiet ,when the pig is measured ,if it arches it's back,the measured data will on deviation,we need to avoid that.

 

2.Operational program of measuring pig:Cutting the hair in the measuring area (try to cut it as clean as possible and scab it with warm water when necessary)→Dabbing coupling agent (or vegetable oil) on the probe plane, probe mode plane and pig-back measuring position→The probe and probe mould are placed in the measuring position, so that the probe mould is closely connected with the back of the pig→Observing and adjusting screen effects to freeze images when desired images are obtained→Measuring backfat thickness and area of the eye muscle,adding information(such as measurement time,the number of pig and gender )→Printing image or processing storage .

3.During the measuring by pig B ultrasound, the probe, the probe model should be closely connected with measured part, but not under heavy pressure.

 

4.The contact surface of the probe is that the acoustic contact surface needs to be cleaned.

 

5.The quality of B ultrasound is shown in two aspects, namely hardware and software.

 

6.Problems such as failure of Veterinary B ultrasound can also cause poor image quality and affect the measurement results .