Product Categories
Contact Us

Henan Tianchi Instrument & Equipment Co.,Ltd

Address:9 Floor 3 Unit 17 Building N0.39 Changxing Road, Huiji District, Zhengzhou City, Henan province, China

Mob:+86-15290868205

Tel:+86-371-56788280

Fax:+86-371-65715725

E-mail:
tianchi-demi@ln2container.com
tianchi-casie@ln2container.com

Website: www.ln2container.com

You are here:Home > News >

Ice Machine In the Installation, Maintenance Precautions

Edit: Henan Tianchi Instrument Equipment Co., Ltd    Date:2017-12-13
 
1, Ice machine installation, should be placed in a suitable environment. Ice machine should not be placed in the open air environment, the best installed in a safe, clean, well-ventilated environment, and not subject to direct sunlight and rain. The company is located in.
2, The ice machine can not be close to the heat source, the use of the environment can not be less than 5 ℃, not higher than 38 ℃, so as not to overheat the condenser heat, not good ice making effect. The company is located in.
3, Ice machine should be installed and a smooth platform, surrounded by space should be left, in order to facilitate heat dissipation, the back of the machine can not be less than 250mm. 
4, Ice machine should be used in accordance with the provisions of the national standard of independent power supply, power supply should ensure reliable grounding, and equipped with fuses and leakage protection switch, voltage fluctuations shall not exceed ± 10% of the rated voltage.
Ice machine in the installation, maintenance precautions
5, Ice machine should be used in line with local drinking water standards, and the installation of filters, etc., to remove impurities in water to avoid blockage. The lowest water temperature 2 ℃, the maximum does not exceed 38 ℃, the lowest water pressure 0.02Mpa, the highest 0.8Mpa. 
6, Should be thoroughly cleaned regularly ice machine inlet valve filter to prevent the inlet is blocked by impurities, and regularly clean the water pipes, sinks, storage tanks and protective film.
7, Regularly clean the ice machine condenser dust, to avoid poor condenser heat caused by machine failure. You can use the vacuum cleaner, small brush and other tools to clean the condenser.